一、结构特点：
箱体全为不锈钢制作，配有可视玻璃门，箱体内放置样品用转盘，采用变频调速器调速，摆管摆幅90°、180°、270°任选。
二、技术参数：
|
喷水环半径： |
R375mm |
|
管径： |
Φ16mm |
|
孔径间距： |
50 mm |
|
喷水孔径： |
0.4mm |
产品详情
特点及用途 Features and purpose
◆本设备用于试验材料在各种强度淋雨的环境下模拟动态运行,以评估该产品的工作品质
◆工作室材料为优质进口不锈钢板,外壳为A3钢板静电喷涂
◆其他所有接触水的部件均为不锈钢或铜质材料
◆本设备适用于对产品零部件及材料进行湖水的试验。
This equipment is used to evaluate the working performance of theproduct through the simulated dynamic operation of the testmaterials exposed to rains of varied intensity.e Studio-quality materials imported steel plates, steel casing of A3e electrostatic sprayingo All other contact with water components are copper or stainless steel material
◆技术参数 Technical parameter
| 型号 Model | zL-6O0LY | zL-100OLY |
| 作室尺寸 Workshop size | 60×60×60cm | 100×100×100cm |
| 工作室温度范围Temperature range of working chambe | RT | RT |
| 喷水直径 Nozzle diameter | 0.4mm | 0.4mm |
| 摆管半径 Pendulum pipe radius | 200mm | 400mm |
| 优质半圆形不锈钢喷水管圆弧直径为400mm /Premium semicircle stainlesssteel spray arc circular pipe diameter | 优质半圆形不锈钢喷水管圆弧直径为800mm /Premium semicircle stainlessteel spray arc circular pipe diameters 800 mm | |
| 喷嘴间距 Nozzle spacing | 50mm | 50mm |
| 喷淋量 Spray amoun | 1.1L/min | 1.8L/min |
| 喷水压力 Spray water pressure | 80-100Kpa | 80-100Kpa |
| 摆管角度 | 1-300°,从中间向两边左右各摆1150°可任意调置.1-300, from centreto both sides around each pendulum 1-150 can be arbitrary set from centreto both sides around each pendulum 1-150 can be arbitrary set |
| 标准选型摆管尺寸mmThe standard selection pendulum pipe size | R200R400,R600R800R1000R1200,R1400R1600摆管半径600mm以上为订做规格( The pendulum pipe radius above600 mm is the ordered specification |
特点及用途 Features and purpose
本试验用于模拟对向外壳各方向加强烈高压下溅水配合高温水蒸气条件下检测无有害影响,适用于汽机车零配件等产品检验其产品性能指标。
This test is used to simulate the condition of strong high pressure with high temperature vapor for outer shell's each direction to test no harmful effectscommonly suit for auto parts to test performance index
技术参数：
| 型号 Model | zL-IP-9K |
| 试样限制 SPtantdard capcity | 本试验设备禁止易燃、易爆、易挥发性物质试样的试验;储存腐蚀性物质试样的试验、储存生物的试验、储存强电磁发射源试样的试验及储存. This machine forbids doing inflammable, explosive, volatile, corrosive, strong radiation products test. |
| 标准内容积 Standard capacity | 1000L |
| 内箱有效尺寸 nner dimension | 1000×1000×1000(mm) WXHXD |
| 外箱尺寸 Outer dimension约( about) | 1820×1887×1500(mm) WXHXD |
| 重量 Weight | 约( about)480kg |
| 最大安装功率 Max installation power | 约( about)22KW |
| 最大电流 Max electric current | 约( about)33A |
| 使用环境条件sage environmental condition | 环境温度为+25℃、相对湿度≤85%、试验箱内无试样条件下测得的数值Temperature: +25 C: R.H. <%, this two values measured under the condition of no |
| 水温度范围 Water temperature range | RT~+85℃ |
| 喷淋总量 Spray volume | 14-16L/min |
| 喷淋压力 Pray pressure | 约(abou)8000-10000Kpa |
| 喷淋方式 Spray method | 1.喷嘴距离样品100~150mm可调;2.0°、30°、60°、90°每个角度喷淋时间可调distance between nozzle and specimen 100-150mm adjustable. 2.0, 30, 60, 90 spray time of each angle adjustable |
| 试验转台转速 Rotating speed of test table | 1-10±1rmin可调/ Adjustable |
| 试验转台承重 Rotary table load bearing | ≤30kg |
| 试验转台直径 Rotary table diameter | +600mm |
| 转台高度 Height of rotary table | 可根据产品大小调节 Adjustable by product size |
| 试验样品固定(选购)Specimen fixed (selection item | 可根据产品形状及尺寸订做试验样品夹具(客户需提供样品详细尺寸图纸或实物) According the shape and dimension ofproducts to make the grip of test specimen(customers should provide detail dimension drawing of specimen or entity) |
| 试验满足条件 Testing meet requirement | DN40050-9中的PX9K高压蒸汽喷射清洗实验方法/IN40050-9|PX9 K high pressure/ steam jet cleaning metho |
| 观察窗 Observation window | 位于门上,尺寸500X500mm宽X高/ ocation on the door, dimension500×500 mm Dxh |
| 喷淋系统 Spray system | 超压自动泄压保护 Automatic leakage pressure protection once over- pressure |
| 储存环境要求Storage environmental requirement | 设备环境温度应保持0℃-+35℃以内/ Environmental temperature of machine should keep within0℃-+35℃ |
